elen +30 210 6560600 - Mon - Fri 09:00 - 17:00 - || End Cr. Stratou Str. Spata Business Park, Spata Greece
elen +30 210 6560600 - Mon - Fri 09:00 - 17:00 - || End Cr. Stratou Str. Spata Business Park, Spata Greece
Certified
ISO 9001:2008
Electronic Sirens
Early Warning Systems

Fire Fighting

Fire Fighting Suits

Fireman Gear

Sub:   Basic Fire Fighting Gear
Classification:    
Material:   Nomex Listed Fabric According to NFPA2112
Model:   DUS1/6KNOMEX111A
Color:   Dark Blue, Yellow, Black

 

 

Fire Fighting Suit

Professional Fire Fighting Suit with International Standards. The Fabric is “UL” Listed according to NFPA 2112. All the requirements of a Fire Fighter and Rescue Operator is included in this Set according to the approved standards.

612/638 Combi Jacket & Salopettes

EN 469:2005/AC:2006 – Xf2, Xr2, Y2, Z2 – Level 2
Certified for use at sea under the Marine Equipment Directive 96/98/EC Modules B & D

660/650 Fire Tunic & Trousers

EN 469:2005/AC:2006 – Xf2, Xr2, Y2, Z2 – Level 2
Certified for use at sea under the Marine Equipment Directive 96/98/EC Modules B & D

639ESS FR Work Wear Coverall

Full length brass zip fastening with cover flap
High collar with FR Velcro® fastened cover flap
Right breast bellows pocket with side nearest zip sewn flat & standard FR Velcro® fastened flap

High Volume Pumping Suit

002/003 FlamePro® High Volume Pumping (HVP) / Fire Investigation Suit
BS EN343 : 2003+A1 : 2007

E Series Structural Fire Coat – PBI/ Stedair/ T-Gard I Runner

E Series Structural Fire Coat. PBI Gold Outer Shell, Stedair Moisture Barrier and T-Gard I Runner Thermal Liner. 3M Firetrim Reflective Trim.

E Series Structural Fire Coat – Nomex 3D Outer Shell

The E Series Structural Fire Coat Nomex 3D Outer Shell with T-Gard II Plus Thermal Liner has been designed for providing ease of mobility & minimum coat rise.

E Series Structural Trouser – Nomex/Moisture Barrier/T-Gard 1 Plus Liner

E Series Structural Nomex Trouser features adjustable Velcro side tabs and heavy duty braces.

Contact Heap up to 1100 C

CE CAT III, EN 407 , EN 388
Soft, Flexible, special insulation
Will not stick to glass
Glove operational use, cost advantage
Use : Glass industry, labor, high temperature Ovens, etc.

Benchmark Suit and Cover All

With Benchmark , safety is the highest concern, monitoring levels of toxicity and allergens; Benchmark FR is unique because of treatment process yields a fabric that is safe to ware directly against the skin and also non-allergenic. Benchmark FR process doesn’t use ammonia to cure the retardant and the formulation does not contain any heavy metals or halogens.

Certified Fireman Suit Data

Consist of :
Throat closure tab located under the collar
Pieces under sleeves to increase movement capacity
Pockets on the front right and left,closing by FR Velcro fastener
25 cm front opening with a FR Velcro and a single stud
Leg hems at least 26 cm
Elastic and adjustable braces
Elastic belts both on the right and the left elastic kemer
Firefighting boots

Fire Fighting Helmets

FILTER TYPE 1
Material: PEDH Pastic 6 point harness and manual adjustment Working temperature: -10 C/ + 50 C Electric insulation up to 440 Vac

Welding Face Shields

Welding visor fitted to industrial helmet Climax model 5-RG. Made of Zytel polyamide Incorporates passive fitted tone 12. Shades available: 8-14 Welding glass measurements 110×55 and 110×90 (mm) Climax 16-P earmuffs can be fitted to it.

F2 X-Trem

Ventilated injected high temperature thermoplastic shell
Quick adjust patented ‘Ratchet System’ ensures multifunctionality without compromising comfort
High performance safety goggles

F1-SF

Gallet F1-SF Fire Fighter’s Helmet
EN 443 : 2008 (helmet); EN 14458 : 2004 (face shield)
Clear or metal coated face shield for extended face protection
Inner ocular visor for rescue & other operations
Chinstrap interface adjustable to the wearer’s shape (4 positions)

F1-XF Fire Helmet

Gallet F1-XF Fire Helmet
Adjustable, high performance ocular visor – optimal fit for all faces to prevent injuries
Adjustment of the wearing position for an optimal comfort and balance for all user profiles
Optimal fit for all users profiles (female, large heads, etc) in all operating conditions

Fire Fighting Footwear

Protective Safety Footwear

Manufactured using both natural and synthetic materials and conforms to the standard quality and performance. Steel toe cap in the footwear protects the wearer’s toes against the risk of injury from falling objects and crushing when worn in hazard working environments.

Dual Density Mini Lug II

Leather Type: Full Grain, Waterproof
Leather Name: Amber Mesa Leather
Last: 694
Sizes: D 7-12, 13, 14, 15, EE8-12, 13
Country: Made in UK

Rubber-Eva Xplorer-Red

Leather Type: Full Grain
Leather Name: Mocha Crazy Horse Leather
Last: 223
Sizes: D 8-12, 13, 14, 15, EE8-12, 13
Country: Made in UK

TPU-PU Galaxy Brown

Leather Type: Full Grain, Water-Resistant
Leather Name: Hazelnut Tramper Leather
Last: 801
Sizes: D 7-12, 13, 14, 15, EE8-12, 13, 14
Country: Made in UK

TPU-PU Galaxy Black

Leather Type: Full Grain, Water-Resistant
Leather Name: Black Yukon Leather
Last: 801
Safety Rating: ASTM F2892-11, EH
Country: Made in UK

Fire Fighting Gloves

CHEMICAL GLOVES

A flexible, soft glove that absorbs perspiration, for ultra comfortable extended wear and with good mechanical resistance .
Seals and protects the hand against chemicals while remaining flexible .

INSULATING GLOVES FOR ELECTRICALWORKS – Electrosoft Class1

For electrical work with a maximal voltage of 7500 volte.
Must be used with a leather overglove.

INSULATING GLOVES FOR ELECTRICALWORKS – Electrosoft Class2

Handling of high voltage of 17000 volte.
Must be used with a leather overglove.

INSULATING GLOVES FOR ELECTRICALWORKS – Electrosoft Class4

Handling of high voltage of 36000 volte.
Must be used with a leather underglove.

Protective Gloves – LABOR

Gray nitric on palm,nylon Size 8,9
Mechanical hazards
Puncture resistance
Tear resistance
Blade cut resistance
Abrasion resistance

Protective Gloves – NITRILO

Gray nitric on palm,nylon Size 8,9
Mechanical hazards
Puncture resistance
Tear resistance
Blade cut resistance
Abrasion resistance

Protective Gloves – 102

Manufactured on 1st quality cowhide split, lined with cotton
Green split reinforcement at palm, thumb and index finger
One size
Mechanical hazards
Puncture resistance
Tear resistance
Blade cut resistance
Abrasion resistance

Protective Gloves – 201

Yellow cow grain driver glove, Size: L and X
Mechanical hazards
Puncture resistance
Tear resistance
Blade cut resistance
Abrasion resistance

Protective Gloves – 301

Red split leather welder glove , Quailed liner ,One size: 13″
Mechanical hazards/ Thermal risks
Burning behavior
Contact heat
Convective heat
Radiant heat
Small splashes molten
metal
Abrasion resistance
Blade cut resistance
Tear resistance
Puncture resistance

Protective Gloves – 90

Made from a mixture of neoprene and latex (blue material) over latex (yellow).
The interior top quality flocked cotton increases comfort amd reduces the risk of irritation.
Thickness: 0.53 mm
Length: 330 mm
The glove is manufactured in size 8, 9 and 10.

Protective Gloves – 95

The gloves are made of black 100% natural cotton and the exterior has textured palms.
Thickness: 0.70 mm
Length: 315 mm
The glove is manufactured in size 8, 9 and 10.

Fire Fighting Equipment

CRAB HOCK

  • The head is made of stainless steel (stainless steel).
  • The length of the stick is three meters.
  • The sticks are made of fiberglass.

A small ax with a leather quiver

  • High durability
  • The handle is electrically insulated for more than (5000) volts
  • Equipped with a leather strap attached to the band to carry
  • 30 cm long

2-WAY DIVIDING BRANCHING

  • Single entry slot type (male) with diameter (2.5) and conforming to British Standard Standard BSS
  • Two openings for the exit of the water type (Female) diameter (2.5) and conform to the standard British standard BSS
  • Each exit slot is equipped with a ball bearing with an arm and rubber seal to prevent leakage.

3-WAY DIVIDING BRANCHING

  • Single entry slot type (male) with diameter (2.5) and conforming to British Standard Standard BSS
  • Three openings for the exit of the water type (Female) diameter (2.5) and conform to the British Standard Standard BSS
  • Each exit slot is equipped with a ball bearing with an arm and rubber seal to prevent leakage.

MOVABLE VENTILATOR

  • Powered by 220 volts and frequency (50) Hz.
  • The engine is protected from smoke smoke effect.
  • Smoke withdrawal rate (10020) m3 / h

NOOSEL

FIRE FIGHTING MULTIPURPOSE WATE HAND BRANCH PIPE NOZZLE

  • body made of light alloy polished finished
  • comes with ball valve
  • can be adjusting shape of water stream by valve from spray paten
  • inlet male coupling size 2.5 ” according to BS336
  • operating pressure 12 bar
  • throw range 25m
  • flow rate 350-400 l/m

MONITARS 111

Maximum working pressure: PN 16
Material: aluminium alloy
Body type: moulded
Opening: by lever
Vertical movement: from +30ْ to +85ْ
Vertical movement adjustment: with lever
Horizontal movement: from +25ْ to +25ْ
Horizontal movement adjustment: with lever
Safety: locking of the legs, anchoring strap.
Carrying handle: YES
Foldable legs: YES
Options: inlet couplings, outlet equipment, collecting device

MONITARS 112

Maximum working pressure: PN16
Material: bronze
Body type: moulded
Horizontal movement: 360ْ
Horizontal movement adjustment: with handwheels, by operating handle or with chains
Vertical movement: from -60ْ to +85ْ
Vertical movement adjustment: with handwheels, with lever or by chains
Options: outlet equipment

MONITARS 113

Maximum working pressure: PN16
Material: stainless steel
Horizontal movement: 360ْ
Horizontal movement adjustment: with lever
Vertical movement: from -60ْ to +65ْ
Vertical movement adjustment: with lever
Safety: locking pins to adjust the horizontal and vertical movements.
Options: outlet equipment

Overall

Proban Dome Raglan Overall

Proban treated fabrics do not smoulder, have no after glow and flame does not spread outside the charred area. Plastic domes with raglan sleeves.

Orange/Navy Cotton Day/Night Overall

100% Cotton drill raglan sleeve overall with dome fastenings.

Orange Cotton Day/Night Overall

100% Cotton drill raglan sleeve overall with dome fastenings.

Yellow/Navy Cotton Raglan Overall

Fully compliant raglan sleeve overall with dome fastenings. 100% Cotton Drill.

White Polycotton Dome Overall

Stainless steel domes, inset sleeves with split cuff. Two front breast pockets and hip pocket. One piece action back with elastic banded waist.

Mid Blue Polycotton Dome Overall

Stainless steel domes, inset sleeves with split cuff. Two front breast pockets and hip pocket. One piece action back with elastic banded waist.

Red Polycotton Zip Overall

Inset sleeves, two breast pockets, hip and ruler pocket, heavy duty brass zip. Elastic back allows for firm fit giving comfort and ease of movement.

Navy Polycotton Dome Roughall

Stainless steel domes, two breast and two lower front patch pockets also with hip ruler pocket. Sleeveless with back elastic straps.